Industrial Long Life Blast Furnace Boiler Fan Explosion Proofing
Introduction
This type of fan is currently used in the boiler industry. The air
volume of the induced draft fan and the difference in wind pressure
are relatively large, in order to adapt to the above situation,
considering the practicability of the fan, in addition to the
20-ton boiler ID fan need large power coupling direct transmission,
the other uses the triangular belt type transmission.
Detail introduction
This series of fans is made of single suction.
Access port and drain hole can be set outside the fan according to
customers' needs to facilitate impeller inspection and cleaning and
avoid impeller scaling. It is generally not stated that it is not
equipped.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
|---|
| 5-06 | 8D | 1450 | 2592～1989 | 12028～20607 | 15 |
| 10D | 1450 | 4051～3108 | 23493～40249 | 55 |
| 11D | 1450 | 3036～2329 | 31269～53571 | 55 |
| 12.4D | 1450 | 3858～2960 | 44792～76740 | 90 |
Product Features
Provide factory measurement performance, vibration, and test report
to prevent failure and ensure the operation of the fan in good
condition.The converging and streamlined air inlet is made into a
unitary structure and bolted to the inlet side of the fan.
FAQ
1,What parameters need to be provided when you design the
industrial centrifugal fans?
A: Air flow, total pressure or static pressure, inlet temperature,
local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2,How about your company’s pre-sales service and after-sales
service?
A: Before our cooperation, we have the professional technical team
to help you make the technical solution according to your working
condition, to make sure the centrifugal fan efficiency operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3,Does your company have qualifications?
A: SIMO Blower has obtained ISO 9001-2008, CE, TUV certifications
and so on.
