Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler
Blower Fan
Introduction
The Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler
Blower Fan has a large flow rate and moderate pressure.
This fan is designed for the purpose of using industrial boiler to
work in the high-efficiency area and achieve the energy-saving
target.
The fan is suitable for equipped with economizer (heater) and smoke
and dust removal device.
It is a high-efficiency energy-saving product jointly designed by
the national fan industry and organized by the national wind power
industry and the Ministry of Machinery Industry.
It has the characteristics of high efficiency, low noise, flat
performance curve and wide efficient area.
Industrial boilers of 5 ~ 35 tons/hour can be used, those with
similar intake conditions and suitable performance can be used, but
the maximum temperature shall not more than250°C.
Before the induced draft fan, dust removal device with a dust
removal efficiency of no less than 85% must be installed to reduce
the dust content of the smoke entering the fan.
It can not only reduce the pollution of the smoke on the
environment, but also reduce the wear of the smoke on the fan,
which is conducive to prolonging the life of the fan.
Technical data
| series | model | Boiler Blower Fan Rotation Speed
(r/min) | Boiler Blower Fan Total Pressure
(Pa) | Boiler Blower Fan Air Capacity
(m³/h) | Power
(kW) |
|---|
9-11 Boiler Blower Fan | 4D | 2900 | 2285～2452 | 3297～6594 | 5.5～7.5 |
| 4.5D | 2900 | 2893～3060 | 4695～9389 | 11～15 |
| 5D | 2900 | 3570～3854 | 6440～12880 | 15～22 |
| 5.6D | 2900 | 4482～4805 | 9048～18095 | 30～45 |
| 6.3D | 1450 | 1422～1500 | 6441～12882 | 7.5～11 |
| 7.1D | 1450 | 1804～1942 | 9220～18439 | 11～18.5 |
| 8D | 1450 | 2285～2462 | 13189～26378 | 18.5～30 |
| 9D | 1450 | 2893～3099 | 18779～37558 | 37～55 |
| 10D | 1450 | 3570～3854 | 25760～42933 | 55～90 |
| 11.2D | 960～1450 | 1961～4835 | 23961～72381 | 30～160 |
| 12.5D | 730～960 | 1412～2638 | 25329～66620 | 22～90 |
| 14D | 730～960 | 1775～3305 | 35586～93596 | 45～160 |
| 16D | 730～960 | 2314～4295 | 53120～139712 | 75～280 |
| 4D | 2900 | 2069～2187 | 3297～6594 | 5.5～7.5 |
| 4.5D | 2900 | 2618～2766 | 4695～9389 | 11～15 |
| 5D | 2900 | 3227～3413 | 6440～12880 | 15～22 |
| 5.6D | 2900 | 4050～4286 | 9048～18095 | 30～37 |
| 6.3D | 1450 | 1285～1383 | 6441～12882 | 5.5～7.5 |
| 7.1D | 1450 | 1628～1746 | 9220～18439 | 11～15 |
| 8D | 1450 | 2069～2226 | 13189～26378 | 18.5～30 |
| 9D | 1450 | 2618～2824 | 18779～37558 | 30～55 |
| 10D | 1450 | 3227～3481 | 25760～51519 | 55～90 |
FAQ
1. What parameters need to be provided when you design the
industrial centrifugal fans?
Answers: Air flow, total pressure or static pressure, inlet
temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales
service?
Answers: Before our cooperation, we have the professional technical
team to help you make the technical solution according to your
working condition, to make sure the centrifugal fan efficiency
operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV
certifications and so on.
